A professional dental 3D printer deserves to be paired with equally professional slicing software to unlock its full potential. With the Sonic CS+ and the DS Slicer dongle, you get a powerful combination that enables a more streamlined, efficient, and user-friendly printing workflow—ideal for busy dental labs or clinics seeking both speed and precision.
In the following article, we’ll guide you step-by-step through the setup process for remote printing, so you can start experiencing the convenience and productivity of this advanced workflow!
Download DS Slicer from the official Phrozen Dental website.
Plug in the DS Slicer license dongle.
Launch the slicing software and select Sonic CS+ as your printer.
Click the gear icon at the top right to access the settings page and change the build platform if needed.
Open the file you wish to print.
Slice the model and save the sliced file.
On the right-hand side, go to the Dashboard to add your device.
Before adding the device, make sure to note your printer’s IP address and ensure both your computer and printer are connected to the same network segment.
Once the printer is successfully added, choose the right machine, click upload and then click Network Sending to start your printing journey!
Comments
0 comments
Article is closed for comments.