How to Manually Add Your 3D Printer to Slicer Software

This article provides guidance on how to add your 3D printer to Slicer Software. If your resin 3D printer is not listed in the software's menu, you can manually input the printer's data - Resolution and Size to add it to the list of available options.

Adding the new printer manually in Slicer

Here's an example of how to add Sonic Mighty 8K to CHITUBOX:

1. Open CHITUBOX and click on Settings
2. Click on Add New Printer > Others > Default
3. Input the following printer data
   1. Resolution：X and Y pixels (px)
   2. Size：X, Y, and Z millimeters (mm)
   3. Mirror： Select LCD_Mirror or Normal

By manually inputting the printer's data, you can ensure that CHITUBOX is configured to work optimally with your machine, resulting in more accurate and precise prints.

Resolution and Print Size of Phrozen Printer

The table below provides the size and resolution for a range of 3D printers. By following the steps above, you can add your printer model manually.

To ensure that your Phrozen 3D printer is fully supported, we suggest downloading the most up-to-date version of CHITUBOX.